Select 100 K standard with Multi Electric (or with manual)

The product with infinite possibilities.

Product information

Type Select 100 K

  • Standard type Select K, with inlaid aluminium profiles

Type K

  • When the wall is closed, there are no visible aluminium profiles
  • Double internal rubber sealing strips
  • ABS edgings to match the colour of the wall
  • Solid edges are optional
  • Approximately ca 4 mm shadow gap between the closed panels

 

Optional Type KA

  • When the wall is closed, there are no visible aluminium profiles
  • Approximately ca 2 mm shadow gap between the closed panels

 

Optional Type KS

  • When the wall is closed, there are no visible aluminium profiles
  • Approximately ca 4 mm shadow gap between the closed panels
  • Panel finish steel painted in RAL color

 

Type U

  • Edge protection aluminium profiles
  • When the wall is closed, there is 6 mm of visible aluminium profiles

 

Frame construction
Specially developed steel and aluminium frames and free-hanging exterior panels make the walls extremely sturdy and provide excellent sound insulation. The panel connections consist of vertical aluminium tube panel side profiles, E6/EV anodised.
The vertical aluminium tube profiles can also be colour coated as an option.

Cover panels
The Multiwal moveable walls are faced with 16 or 19 mm high-quality board V20E1/720.
These cover panels are suspended on the rubber profiles of the frame.
Due to the unique suspended construction, the cover panels can easily be replaced.
If required, MDF exterior panels can also be used.

Optional cover panels

  • B1 low flammability
  • A2 non-flammable
  • B1 finishes

Track
Aluminium track in standard colour RAL 9010. All other colours are available upon request.

Running gear
Bearing rollers with high-quality roller technology have been specially developed for the Multiwal moveable walls. Combined with an ingenious aluminium track system, the panels can be easily moved.

Panel height adjustment
Panel height is fully adjustable without dismantling the main assembly. Disturbing the ceiling finish is not necessary to fine tune the panels.

Vertical interface
Concave/convex aluminium tube  profiles guarantee that the seal is effective and insulates properly. The solid and precise connection between the panels is achieved by means of strong, full height magnetic strips and purpose made sound sealing strips located on the inner face.

Electrical contacts
Specially developed low voltage electrical contacts are housed in unique concave/convex aluminum profiles that guarantee ease of operation and an uninterrupted and safe electrical flow between the panels.

Horizontal closing
To obtain the best soundproofing effect, the wall must fit tightly against the floor and ceiling. To achieve this, the movable walls have a Multi Electric system used to extend the pressure seals, which have flexible rubber pads. The pressure seals naturally compensate for possible unevenness in the floor.

Pressure seals
Each panel is fitted with black anodised pressure seals at the top and bottom. The compressive force of 2 kN/m² can be tuned by the microprocessor.

Select 100 K

  • Panel thickness 100 mm
  • Panel width ma. 126 mm (wider panels on request)
  • Panel height max. 20000 mm
  • Soundproofing: Rw, P 41,43,45,46,47,48,49,50, 51,52 and 53 dB

Select 110  K

  • Panel thickness 110 mm
  • Panel width max. 1260 mm (wider panels on request)
  • Panel height max. 20000 mm
  • Soundproofing: Rw, P 54,55 and 56 dB

Select 120  K

  • Panel thickness 120 mm
  • Panel widht max 1260 mm (wider panels on request)
  • Panel max. heidth 15000 mm
  • Soundproofing: Rw, P 59 dB

Soundproofing
DIN EN ISO 10140-1,2,4,5 laboratory values

Surface weight 20 – 50 kg/m2, depending on the sound insulation

 Elements lis

NE
Standard basic panel

 

 

 

TEW
Telescopic wall jamb. The Select 120 and the Commandoor are fitted as standard with a telescopic wall jamb. The Select 100 and 110 models can also be delivered with a telescopic wall jamb. The major advantage of this option is that all electrical components i.e. transformer, microprocessor and key switch for the Multi Electric are fully integrated within the assembly. The telescopic wall jamb has the same finish as the wall.

 

TEF
All models Select are be optionally provided with an internal moveable sleeve (TEF). When the telescopic panel is fully extended, it is flush with the face of the wall. The telescopic moveable sleeve has the same finish as the wall.

 

 

FE
All panels can be supplied with windows if required. Every conceivable configuration can be applied to the panels, giving the designer creative freedom.

 

 

EE/SE
Panels can be supplied with optional corner connections (EE), to facilitate the connection to other adjacent moveable walls. Limitless other special panels (SE) can also be supplied.

 

 

FT
Fixed pass door. The telescopic panel can be replaced by or used in conjunction with a fixed pass door. The pass door is full height and is fixed to one end of the existing building structure. The door is equipped with pressure seals at the top and bottom, which extend automatically during the closing action of the door.

 

 

DT
Pass door panel (single hinged). This fully moveable pass door is constructed with a high-quality welded steel frame. This solid construction makes any type of floor track or locking mechanism redundant. The door is equipped with a pressure seal at the bottom, which extends automatically during the closing action of the door. During sliding of the pass door panel, the door will be secured automatically.

 

DTZ
Pass door panel (double hinged). This fully moveable pass door is constructed with a high-quality welded steel frame. This solid construction makes any type of floor track or locking mechanism redundant. The doors are equipped with pressure seals at the bottom, which extend automatically during the closing action of the doors. During sliding of the pass door panels, the doors will be secured automatically.

 

 

Technical drawings

Technical drawings Type Select 100 K with Multi >< Electric or manual

Front views:

  1. Front view panel wall with inset pass door
  2. Front view panel wall with communication panel

Overview panels:

  1. Panel overview NE normal panel
  2. Panel overview TE telescopic panel
  3. Panel overview FT communication panel
  4. Panel overview DT inset pass door panel
  5. Panel overview DTZ inset double pass door panel

Overview glass panel:

  1. Glass dimensions type 1,2,4,5 and 6
  2. Glass dimensions DT and TE type 3
  3. Glass dimensions DTZ and FT type 3

Panel connections NE normal panel:

  1. NE: Wall joint Select 100 K (not connected)
  2. NE: Panel joint Select 100 K (not connected)
  3. NE: Panel joint Select 100 K (connected)
  4. NE: Panel joint Select 100 KA (not connected)
  5. NE: Panel joint Select 100 KA (connected)
  6. NE: Panel joint Select 100 KS (not connected)
  7. NE: Panel joint Select 100 KS (connected)
  8. NE: Panel joint Select 100 U (not connected)
  9. NE: Panel joint Select 100 U (connected)

Panel connections TE telescopic panel:

  1. TE: Telescopic panel Select 100 K (not connected)
  2. TE: Telescopic panel Select 100 K (connected)

Panel connections special panels:

  1. EE: Angled panel Select 100 K 90 degrees (outside)
  2. EE: Angled panel Select 100 K 90 degrees (inside)
  3. EE: Angled panel Select 100 K 135 degrees
  4. LI: Lip panel Select 100 K

Section thru:

  1. Section thru a typical Select 100 K

 

Specification despriction

This specification service uses the STABU catalogue 2011-1

Multiwal BV
Kleine Beer 20
2950 AG Alblasserdam
The Netherlands

T: +31 (0) 78 – 692 21 22
F: +31 (0) 78 – 693 42 28